Welcome to Your Copilot

Connect your Velo Copilot device via USB-C to check connection status, inspect IP address, configure Wi-Fi, check battery health, or access the live on-device console.

Device Connection Status

Device ID

—

Battery SOC

—

Device IP

192.168.144.1

Troubleshooting Connection:

Ensure you are using a USB-C data cable (charge-only cables will not create a network interface).
On macOS, click "Allow" if prompted to allow the network accessory to connect.
The Copilot appears as a high-speed virtual Ethernet adapter at IP 192.168.144.1 (local.velo.ai).

Power On & Connection

Power On Device

Hold down the power button for 2 seconds to turn on the Copilot. The status LED will pulse cyan while booting.

Connect via USB-C

Plug the USB-C data cable from your computer into the Copilot. Your computer will automatically detect a network adapter at 192.168.144.1.

Automatic Detection

This page automatically probes for the device. Once connected, the indicator will turn green and display the device ID, IP address, and battery level.

Launch or Embed Console

Click Launch Copilot Console or Embed Console Here to inspect live camera feeds, configure Wi-Fi, and check system status.

Live On-Device Console (local.velo.ai)